Quorum quenching effect of cyclodextrins on the pyocyanin and pyoverdine production of Pseudomonas aeruginosa.

Various virulence determinants in Pseudomonas aeruginosa are regulated by the quorum sensing (QS) network producing and releasing signalling molecules. Two of these virulence determinants are the pyocyanin and pyoverdine, which interfere with multiple cellular functions during infection. The application of QS-inhibiting agents, such as cyclodextrins (CDs), appears to be a promising approach. Further to method development, this research tested in large-volume test systems the effect of α- and ß-CD (ACD, BCD) at 1, 5, and 10 mM concentrations on the production of pyocyanin in the P. aeruginosa model system. The concentration and time-dependent quorum quenching effect of native CDs and their derivatives on pyoverdine production was tested in a small-volume high-throughput system. In the large-volume system, both ACD and BCD significantly inhibited pyocyanin production, but ACD to a greater extent. 10 mM ACD resulted in 58% inhibition, while BCD only ~40%. Similarly, ACD was more effective in the inhibition of pyoverdine production; nevertheless, the results of RMANOVA demonstrated the significant efficiency of both ACD and BCD, as well as their derivatives. Both the contact time and the cyclodextrin treatments significantly influenced pyoverdine production. In this case, the inhibitory effect of ACD after 48 h at 12.5 mM was 57%, while the inhibitory effect of BCD and its derivatives was lower than 40%. The high-level significant inhibition of both pyocyanin and pyoverdine production by ACD was detectable. Consequently, the potential value of CDs as QS inhibitors and the antivirulence strategy should be considered. KEYPOINTS: • Applicability of a simplified method for quantification of pyocyanin production was demonstrated. • The cyclodextrins significantly affected the pyocyanin and pyoverdine production. • The native ACD exhibited the highest attenuation in pyoverdine production.

The potential of Hungarian bauxite residue isolates for biotechnological applications.

Bauxite residue (red mud) is considered an extremely alkaline and salty environment for the biota. We present the first attempt to isolate, identify and characterise microbes from Hungarian bauxite residues. Four identified bacterial strains belonged to the Bacilli class, one each to the Actinomycetia, Gammaproteobacteria, and Betaproteobacteria classes, and two to the Alphaproteobacteria class. All three identified fungi strains belonged to the Ascomycota division. Most strains tolerated pH 8-10 and salt content at 5-7% NaCl concentration. Alkalihalobacillus pseudofirmus BRHUB7 and Robertmurraya beringensis BRHUB9 can be considered halophilic and alkalitolerant. Priestia aryabhattai BRHUB2, Penicillium chrysogenum BRHUF1 and Aspergillus sp. BRHUF2 are halo- and alkalitolerant strains. Most strains produced siderophores and extracellular polymeric substances, could mobilise phosphorous, and were cellulose degraders. These strains and their enzymes are possible candidates for biotechnological applications in processes requiring extreme conditions, e.g. bioleaching of critical raw materials and rehabilitation of alkaline waste deposits.

Ecotoxicity characterization assisted performance assessment of electro-bioremediation reactors for nitrate and arsenite elimination.

The performance of combined reduction of nitrate (NO3 - ) to dinitrogen gas (N2 ) and oxidation of arsenite (As[III]) to arsenate (As[V]) by a bioelectrochemical system was assessed, supported by ecotoxicity characterization. For the comprehensive toxicity characterization of the untreated model groundwater and the treated reactor effluents, a problem-specific ecotoxicity test battery was established. The performance of the applied technology in terms of toxicity and target pollutant elimination was compared and analyzed. The highest toxicity attenuation was achieved under continuous flow mode with hydraulic retention time (HRT) = 7.5 h, with 95%, nitrate removal rate and complete oxidation of arsenite to arsenate. Daphnia magna proved to be the most sensitive test organism. The results of the D. magna lethality test supported the choice of the ideal operational conditions based on chemical data analysis. The outcomes of the study demonstrated that the applied technology was able to improve the groundwater quality in terms of both chemical and ecotoxicological characteristics. The importance of ecotoxicity evaluation was also highlighted, given that significant target contaminant elimination did not necessarily lower the environmental impact of the initial, untreated medium, in addition, anomalies might occur during the technology operational process which in some instances, could result in elevated toxicity levels.

Ecotoxicity attenuation by acid-resistant nanofiltration in scandium recovery from TiO2 production waste.

The lack of high-grade scandium (Sc) ores and recovery strategies has stimulated research on the exploitation of non-ore-related secondary sources that have great potential to safeguard the critical raw materials supply of the EU's economy. Waste materials may satisfy the growing global Sc demand, specifically residues from titanium dioxide (TiO2) production. New technologies are being developed for the recovery of Sc from such residues; however, the possible environmental impacts of intermediary products and residues are usually not considered. In order to provide a comprehensive ecotoxicity characterisation of the wastes and intermediate residues resulting from one promising new technology, acid-resistant nanofiltration (arNF), a waste-specific ecotoxicity toolkit was established. Three ecotoxicity assays were selected with specific test parameters providing the most diverse outcome for toxicity characterisation at different trophic levels: Aliivibrio fischeri (bacteria) bioluminescence inhibition (30 min exposure), Daphnia magna (crustacean) lethality and immobilisation (24 h exposure) and Lemna minor (plant) growth inhibition with determination of the frond number (7 d exposure). According to our results, the environmental impact of the generated intermediate and final residues on the aquatic ecosystem was mitigated by the consecutive steps of the filtration methods applied. High and statistically significant toxicity attenuation was achieved according to each test organism: toxicity was lowered based on EC20 values, according to the A. fischeri bioluminescence inhibition assay (by 97%), D. magna lethality (by 99%) and L. minor frond number (by 100%), respectively, after the final filtration step, nanofiltration, in comparison to the original waste. Our results underline the importance of assessing chemical technologies' ecotoxicological and environmental impacts with easy-to-apply and cost-effective test methods to showcase the best available technologies.

Intensification of the photodegradation efficiency of an emergent water pollutant through process conditions optimization by means of response surface methodology.

Heterogeneous photocatalysis has been increasingly investigated during the past years and has been recognized as a promising technique for clean and safe water purification. The current study exploits the advantage of this technique demonstrating that the removal of a biorefractory water pollutant named clofibric acid can be really improved by photocatalysis through a parametric comprehensive investigation and optimization study based on response surface methodology. Its novelty comes from the approach used to enhance the efficiency of the photocatalytic degradation of clofibric acid. A custom central composite design consisting of 49 trials was applied for process modeling and a quadratic robust model was derived based on the analysis of variance for the optimization of the process parameters. The effective removal of the target molecule with about 70% carbon mineralization was achieved under optimal photocatalytic conditions: 1.5 mg/L as the initial concentration of pollutant, 0.61 g/L catalyst, and an irradiation time of 190 min. Further, it was provided that nitrates play a positive role in the removal of this pollutant, while hydrogenocarbonates slow down its elimination. The ecotoxicity evaluation at different trophic levels confirmed the low toxicity of photodegradation by-products. Data analysis demonstrated that response surface methodology is a reliable approach for the optimization of the interactive effects of photocatalytic process parameters and is able to enhance their performance for the complete elimination of this hardly removed water pollutant.

Effect of Cyclodextrins on the Biofilm Formation Capacity of Pseudomonas aeruginosa PAO1.

Quorum sensing (QS) is a population-density-dependent communication process of microorganisms to coordinate their activities by producing and detecting low-molecular-weight signal molecules. In pathogenic bacteria, the property controlled by QS is often related to infectivity, e.g., biofilm formation. Molecular encapsulation of the QS signals is an innovative method to prevent the signals binding to the receptors and to attenuate QS. Cyclodextrins (CDs) may form an inclusion complex with the signals, thus reducing the communication (quorum quenching, QQ). A systematic study was performed with α-, ß-cyclodextrin, and their random methylated, quaternary amino and polymer derivatives to evaluate and compare their effects on the biofilm formation of Pseudomonas aeruginosa. To examine the concentration-, temperature- and time-dependency of the QQ effect, the CDs were applied at a 0.1-12.5 mM concentration range, and biofilm formation was studied after 6, 24, 48 and 72 h at 22 and 30 °C. According to the results, the QS mechanism was significantly inhibited; the size of the cavity, the structure of the substituents, as well as the monomeric or polymeric character together with the concentration of the CDs have been identified as key influencing factors of biofilm formation. Statistically determined effective concentration values demonstrated outstanding efficiency (higher than 80% inhibition) of α-CD and its random methylated and polymer derivatives both on the short and long term. In summary, the potential value of CDs as inhibitors of QS should be considered since the inhibition of biofilm formation could significantly impact human health and the environment.

Cyclodextrin-mediated quorum quenching in the Aliivibrio fischeri bioluminescence model system - Modulation of bacterial communication.

Bacterial Quorum Sensing is a cell-to-cell communication process, in which, bacteria, performing cooperative behaviour, produce and detect extracellular signalling chemicals, to monitor cell population density. Numerous bacterial processes including bioluminescence, virulence factor production, biofilm formation etc. are known to be influenced by this bacterial communication network. Interest in QS systems has emerged in response to the fact that these processes have significant impact on the environment, human health as well as agriculture. Cyclodextrins-mediated quorum quenching is an innovative approach and the available information about their effects is very scarce. We selected Aliivibrio fischeri, a bacterium, producing light, based on Quorum Sensing, to be the first to investigate the cyclodextrins' effect on this bioluminescence. A systematic study was performed with twelve different cyclodextrin compounds in order to determine their concentration- and time-dependent bioluminescence inhibitory effect in the A. fischeri model system. Especially high quorum quenching effect was found for α-cyclodextrin: 10 mM α-cyclodextrin at 120 min contact time which caused ~64% inhibition of bioluminescence. Experiments with the co-administration of α-cyclodextrin and N-(3-oxohexanoyl)-L-homoserine lactone, the signalling molecule of A. fischeri clearly showed, that the stimulating effect of this signal was diminished by α-cyclodextrin, suggesting, that complexation was responsible for the observed Quorum Sensing suppression. Although ß-cyclodextrin and its hydroxypropyl derivative significantly inhibited bioluminescence at as low as 0.156 mM concentration, their efficiency did not reach the level of α-cyclodextrin. According to our results, the autoinducer-dependent quorum sensing mechanism in Aliivibrio fischeri was markedly inhibited, the quorum quenching effect of cyclodextrins was clearly demonstrated. The efficiency was influenced by several parameters; the size of the interior cavity, the structure and the concentration of the cyclodextrins, as well as the contact time with the cells. The application of a cyclodextrin-trap for complexation of signal molecules may be a novel, promising method for influencing QS interfering strategies, for example, to enhance the efficiency of various biotechnologies, as well as to find alternative approaches against bacterial proliferation and infections. Furthermore, our results could also serve as a basis for further research with bacterial or plant model systems, in which the same chemical signals may induce physiological responses.

Ecotoxicity Assessment of Graphene Oxide by Daphnia magna through a Multimarker Approach from the Molecular to the Physiological Level including Behavioral Changes.

The extensive use of engineered nanomaterials, such as graphene oxide (GO), is stimulating research about its potential environmental impacts on the aquatic ecosystem. This study is aimed to comprehensively assess the acute toxicity of a well-characterized GO suspension to Daphnia magna. Conventional ecotoxicological endpoints (lethality, immobilization) and more sensitive, sublethal endpoints (heartbeat rate, feeding activity, and reactive oxygen species (ROS)) production were used. The possible normalization of the heartbeat rate and feeding activity in clean test medium was also investigated. The fate, time-dependent, and concentration-dependent aggregation behaviour of GO was followed by dynamic light scattering, UV-Vis spectroscopy, and zeta potential measurement methods. The EC20 value for immobilization was 50 mg/L, while, for physiological and behavioural endpoints, it ranged from 8.1 mg/L (feeding activity) to 14.8 mg/L (immobilization). The most sensitive endpoint was the ROS production with EC20 = 4.78 mg/L. 24-h recovery experiments revealed that feeding activity was restored only up to a certain level at higher concentrations, indicating that the potential environmental health effects of GO cannot be neglected. Alterations of normal physiology (heart rate) and feeding activity may be associated with increased risk of predation and reproductive decline, highlighting that GO may have impacts on population and food web dynamics in aquatic ecosystems.

Long-term effects of grain husk and paper fibre sludge biochar on acidic and calcareous sandy soils - A scale-up field experiment applying a complex monitoring toolkit.

Biochar is produced from a wide range of organic materials by pyrolysis, specifically for improvement of poor quality soils. One of the main issues nowadays in studying biochar as soil amendment is to upscale experiments and move from short-term, laboratory conditions to long-term field trials. This paper presents a long-term field study, being the final step of a scale-up technology development, on grain husk and paper fibre sludge biochar application for soil improvement with focus on two degraded soil types of a temperate region. The effects of biochar on an acidic and a calcareous sandy agricultural soil were studied applying a complex approach including physico-chemical, biological and ecotoxicological methods. Our study demonstrated that the applied biochar had positive direct and indirect influences on the acidic sandy soil, but these effects were different in terms of extent and time. 30 t/ha biochar addition improved the pH of the acidic sandy soil by 24% and also increased significantly the nutrient concentrations (P2O5 by 68%, K2O by 11% and organic matter by 33%), and the water-holding capacity after 30 months. Furthermore, biochar addition improved also the microbiological activity and diversity in the acidic sandy soil. Biochar application did not induce any negative effects. Biochar had no toxic effect on the plants and the biochar-treated soil provided a more liveable habitat for soil living animals than the untreated acidic sandy soil. The favourable biochar-mediated influences on soil properties were manifested mainly in the acidic sandy soil, proving that the biochar-related advantages have to be verified for different soil types. The benefits of grain husk and paper fibre sludge biochar application in an acidic sandy soil were confirmed on the long term by the applied tiered approach.

Acidic sandy soil improvement with biochar - A microcosm study.

Biochar produced from a wide range of organic materials by pyrolysis has been reported as a means to improve soil physical properties, fertility and crop productivity. However, there is a lack of studies on the complex effects of biochar both on the degraded sandy soil physico-chemical properties and the soil biota as well as on toxicity, particularly in combined application with fertilizer and compost. A 7-week microcosm experiment was conducted to improve the quality of an acidic sandy soil combining variations in biochar types and amounts, compost and fertilizer application rates. The applied biochars were produced from different feedstocks such as grain husks, paper fibre sludge and wood screenings. The main purpose of the microcosm experiment was to assess the efficiency and applicability of different biochars as soil amendment prior to field trials and to choose the most efficient biochar to improve the fertility, biological activity and physical properties of acidic sandy soils. We complemented the methodology with ecotoxicity assessment to evaluate the possible risks to the soil as habitat for microbes, plants and animals. There was clear evidence of biochar-soil interactions positively affecting both the physico-chemical properties of the tested acidic sandy soil and the soil biota. Our results suggest that the grain husk and the paper fibre sludge biochars applied to the tested soil at 1% and 0.5 w/w% rate mixed with compost, respectively can supply a more liveable habitat for plants and soil living animals than the acidic sandy soil without treatment.

Direct toxicity assessment - Methods, evaluation, interpretation.

Direct toxicity assessment (DTA) results provide the scale of the actual adverse effect of contaminated environmental samples. DTA results are used in environmental risk management of contaminated water, soil and waste, without explicitly translating the results into chemical concentration. The end points are the same as in environmental toxicology in general, i.e. inhibition rate, decrease in the growth rate or in yield and the 'no effect' or the 'lowest effect' measurement points of the sample dilution-response curve. The measurement unit cannot be a concentration, since the contaminants and their content in the sample is unknown. Thus toxicity is expressed as the sample proportion causing a certain scale of inhibition or no inhibition. Another option for characterizing the scale of toxicity of an environmental sample is equivalencing. Toxicity equivalencing represents an interpretation tool which enables toxicity of unknown mixtures of chemicals be converted into the concentration of an equivalently toxic reference substance. Toxicity equivalencing, (i.e. expressing the toxicity of unknown contaminants as the concentration of the reference) makes DTA results better understandable for non-ecotoxicologists and other professionals educated and thinking based on the chemical model. This paper describes and discusses the role, the principles, the methodology and the interpretation of direct toxicity assessment (DTA) with the aim to contribute to the understanding of the necessity to integrate DTA results into environmental management of contaminated soil and water. The paper also introduces the benefits of the toxicity equivalency method. The use of DTA is illustrated through two case studies. The first case study focuses on DTA of treated wastewater with the aim to characterize the treatment efficacy of a biological wastewater treatment plant by frequent bioassaying. The second case study applied DTA to investigate the cover layers of two bauxite residue (red mud) reservoirs. Based on the DTA results the necessary toxicity attenuation rate of the cover layers was estimated.

Removal of emerging micropollutants from water using cyclodextrin.

Small scale laboratory experiment series were performed to study the suitability of a cyclodextrin-based sorbent (ß-cyclodextrin bead polymer, BCDP) for modelling the removal of micropollutants from drinking water and purified waste water using simulated inflow test solutions containing target analytes (ibuprofen, naproxen, ketoprofen, bisphenol-A, diclofenac, ß-estradiol, ethinylestradiol, estriol, cholesterol at 2-6 µg/L level). This work was focused on the preliminary evaluation of BCDP as a sorbent in two different model systems (filtration and fluidization) applied for risk reduction of emerging micropollutants. For comparison different filter systems combined with various sorbents (commercial filter and activated carbon) were applied and evaluated in the filtration experiment series. The spiked test solution (inflow) and the treated outflows were characterized by an integrated methodology including chemical analytical methods gas chromatography-tandem mass spectrometry (GC-MS/MS) and various environmental toxicity tests to determine the efficiency and selectivity of the applied sorbents. Under experimental conditions the cyclodextrin-based filters used for purification of drinking water in most cases were able to absorb more than 90% of the bisphenol-A and of the estrogenic compounds. Both the analytical chemistry and toxicity results showed efficient elimination of these pollutants. Especially the toxicity of the filtrate decreased considerably. Laboratory experiment modelling post-purification of waste water was also performed applying fluidization technology by ß-cyclodextrin bead polymer. The BCDP removed efficiently from the spiked test solution most of the micropollutants, especially the bisphenol-A (94%) and the hormones (87-99%) The results confirmed that the BCDP-containing sorbents provide a good solution to water quality problems and they are able to decrease the load and risk posed by micropollutants to the water systems.